Fire doors compliant with EN 1634-1 standards made up of aluminum alloy thermal break profiles in accordance with EN AW-6060 standards filled with fire-fighting materials based on calcium silicates and sulphates, with or without rebates on the wall, glazing beads on one or the other side. Doors without threshold for indoor installation and with threshold for installation facing outside. Transom at handle height. Without transom is optional and possible for doors up to L 1200-1150 (EI 30 – EI 60) and up to L 1100-1050 (EI 90 – EI 120), to be requested when ordering.
2 glass panels per door in tempered fireproof glass with interposed intumescent material, glass safety class 1B1 according to EN 12600.
Standard finish of the profiles oven hardened paint RAL 9010 smooth semi-opaque, other RAL shades optional.
The prices always automatically include the components and accessories described below as they were present on the prototype subject to fire testing and necessary to provide the required fire resistance performance.
Self-expanding gaskets on the perimeter and weather stripping.
Overhead doorcloser with sliding arm and for double leaf door twin doorcloser with sliding arms and integrated closing regulator, silver colour.
2 three wings (EI30 – EI60) and 3 three wings (EI90 – EI120) registrable hinges per leaf in doors within basic dimensions. For bigger doors additional third or fourth hinge is necessary.
2 door bolts per leaf.
Firedoor mortise lock with 1 locking point. If double leaf door also mortise counter lock in the secondary leaf having integrated rods for top in frame locking and bottom in floor socket.
Pair of fire U shaped handles in stainless steel at 95 cm from the finished floor complete with plates and cylinder holes. Passing cylinder with 3 keys.
Fastening of shutters to the walls with anchors or dowels (not included) on the masonry or with screws (not included) on a plasterboard wall or similar insulated and protected metal structure. Possible fastening on a pre-laid sub-frame available as option.
Glasses and accessories supplied disassembled and packed separately.
For the main dimensions and net passage dimensions see the following drawings. Any custom drawings available upon request.
This is the basic solution for double leaf.
A= standard supply with sill H 15 mm.
B= with additional ¾ beveled profile
C= consealed against internal floor
Following the accessories normally included in the price, present on the burned prototype subjected to testing and necessary to give the declared performance
ADDITIONAL OR DIFFERENT ACCESSORIES TO THE ABOVE OPENING WINDOWS.
The same profiles and glass panes are used, opening accessories not present. For aesthetic reasons or too big glass surfaces it is possible to insert upright profiles or horizontal transoms so to divide the glass in more pieces. Instead of vertical profiles it is possible to separate the glass panes with a silicone joint coplanar with the glass.
ADDITIONAL OR DIFFERENT ACCESSORIES TO THE ABOVE OPENING WINDOWS.
The same profiles and glass panes are used.
2 slim hinges on the lower horizontal profile with the possibility of adjusting the gap between the leaf and the frame.
1 electric actuator 24 V DC silver/white finish for window widths up to mm 1400, from widths 1401 up to 2200 2 actuators.
Pair of opening limiting arms.
2 bolts.
Hole covers for water draining.
NB. Smoke and heat detectors not included.
NB. These windows are only available in 30-60-90 minutes versions.
ADDITIONAL OR DIFFERENT ACCESSORIES TO THE ABOVE OPENING WINDOWS.
Same glass panes, non-thermal break aluminum profiles and without night closing (optional).
Compliant with EN 16005 and Machinery Directive 42/2006.
Automation mechanism as per technical data below, rail and roller carriage, tiling protection, self-cleaning.
Profile finishing RAL 9010, labyrinths RAL 9006 and 9010, silver anodized automation cover.
Installation on a masonry wall or plasterboard partition with a minimum thickness of 125 mm and having internal reinforcement for fixing and supporting the automation and rail,. Maximum weight 200 kg per leaf,
Maximum opening-closing speed 0.8 m/s, hold open time 0-60 s, max adjustable opening-closing force 150 N. Minimum/maximum width of each door 700/1200 mm, adjustment 40 mm.
Minimum/maximum height 2000/2400 mm, adjustment 12 mm.
NB. These windows are only available in 30-60-90 minutes versions.
DOOR OPERATION.
The switch will allow 2 modes of use: door automatically – door closed. In the event of an alarm and/or failure of the 220V power supply, the door, in whatever mode it has been set, (open and/or automatic) closes immediately, excluding any connected accessory for both the opening and safety command. In alarm the door will remain closed. The functionality of the door can only return to normal when the alarm is over.
AUTOMATION TECHNICAL DATA.
230 V and transformer, frequency 50-60 Hz, 200 W, locking mechanism toothed belt, electromagnetic, bi-stable. Control unit DCU1 NT with fault statistical data memory, software update, connection for fire alarm system, power supply for peripheral. Bus interface optional. 3 programmable inputs and 2 programmable outputs, NiCd battery 24V, 700mA, double gear motor, torque 400 Ncm, IP rating 20, disconnection from mains switch in the automation.
