Handed Doors Customised to Order Fire Rated and Multipurpose

Scope

Handed doors are constructed when the place where they’ll be installed is known.
Doors have to be constructed handed DX or SX for the following reasons:
They are of special width or height.
They are double leaf.
They have a vision panel or a louvre.
The client wants the leaf prepared with the holes for the fastening of the antipanic crossbar.
They are with certificate for installation on plasterboard partitions.
They are with certificate for installation on sub-frames.
They have to be made of stainless steel.
They are of sound reduction type.
The leaf has SCA – Access Control System.
The client prefers them to the reversible type for aesthetic reasons.

Description

DOOR EI2 60 SINGLE LEAF Door metallic fire rated 60 minutes single leaf DX or SX handed model, supplied assembled with high resistance steel frame on 3 sides and lower distance piece to remove after installation and leaf painted with epoxy-polyester powders oven hardened embossed RAL 9010 tone, with clamps to bend open and holes for fixing with expansion screws, 1 hinge with spring and 1 bearing hinge, total thickness of leaf 53 mm of galvanized double steel sheet, fire rating core, thermo-expanding gasket between frame and leaf, 1 bolt hinge side, CE marked lock with tongue and turns, black safety handle with steel core, plates and Patent key, conformity mark metallic label, sticker with data, booklet for installation use and maintenance, copy of certificate or homologation and conformity declaration.

DOOR EI2 60 DOUBLE LEAF Door metallic fire rated 60 minutes double leaf DX or SX handed model, supplied assembled or unassembled depending on dimensions with high resistance steel frame on 3 sides and lower distance piece to remove after installation and leaves painted with epoxy-polyester powders oven hardened embossed RAL 9010 tone, with clamps to bend open and holes for fixing with expansion screws, 2 hinges with spring and 2 bearing hinges, total thickness of leaf 53 mm of galvanized double steel sheet, fire rating core, thermo-expanding gasket between frame and leaf, 1+1 bolts hinge sides, CE marked lock with tongue and turns in main leaf and mortise lock with concealed rods and device for the self-closing at top and floor in secondary leaf, floor socket, closing regulator, black safety handle with steel core, plates and Patent key, conformity mark metallic label, sticker with data, booklet for installation use and maintenance, copy of certificate or homologation and conformity declaration.

DOOR EI2 120 SINGLE LEAF Door metallic fire rated 120 minutes single leaf DX or SX handed model, supplied assembled with high resistance steel frame on 3 sides and lower distance piece to remove after installation and leaf painted with epoxy-polyester powders oven hardened embossed RAL 9010 tone, with clamps to bend open and holes for fixing with expansion screws, 1 hinge with spring and 1 bearing hinge, total thickness of leaf 63 mm of galvanized double steel sheet, fire rating core, thermo-expanding gasket between frame and leaf, 2 bolts hinge side, CE marked lock with tongue and turns, black safety handle with steel core, plates and Patent key, conformity mark metallic label, sticker with data, booklet for installation use and maintenance, copy of certificate or homologation and conformity declaration.

DOOR EI2 120 DOUBLE LEAF Door metallic fire rated 120 minutes double leaf DX or SX handed model, supplied assembled or unassembled depending on dimensions with high resistance steel frame on 3 sides and lower distance piece to remove after installation and leaves painted with epoxy-polyester powders oven hardened embossed RAL 9010 tone, with clamps to bend open and holes for fixing with expansion screws, 2 hinges with spring and 2 bearing hinges, total thickness of leaf 63 mm of galvanized double steel sheet, fire rating core, thermo-expanding gasket between frame and leaf, 2+2 bolts hinge sides, CE marked lock with tongue and turns in main leaf and mortise lock with concealed rods and device for the self-closing at top and floor in secondary leaf, floor socket, closing regulator, black safety handle with steel core, plates and Patent key, conformity mark metallic label, sticker with data, booklet for installation use and maintenance, copy of certificate or homologation and conformity declaration.

DOOR MULTIPURPOSE (NOT FIRE RATED) SINGLE LEAF Door metallic single leaf DX or SX handed model, supplied assembled with high resistance steel frame on 3 sides and lower distance piece to remove after installation and leaf painted with epoxy-polyester powders oven hardened embossed RAL 9010 tone, with clamps to bend open and holes for fixing with expansion screws, 2 bearing hinges of reduced dimension mm 98 x 16,5 Ø, total thickness of leaf 53 mm of galvanized double steel sheet, honeycomb fiber core, CE marked lock with tongue and turns, black safety handle of plastic, plates and Patent key, sticker with data, booklet for installation use and maintenance.

DOOR MULTIPURPOSE (NOT FIRE RATED) DOUBLE LEAF Door metallic double leaf DX or SX handed model, supplied assembled up to the dimension wall opening 1500 x 2150 and unassembled for bigger dimensions with high resistance steel frame on 3 sides and lower distance piece to remove after installation and leaf painted with epoxy-polyester powders oven hardened embossed RAL 9010 tone, with clamps to bend open and holes for fixing with expansion screws, 4 bearing hinges of reduced dimension mm 98 x 16,5 Ø, total thickness of leaves 53 mm of galvanized double steel sheet, honeycomb fiber core, CE marked lock with tongue and turns in main leaf and manual latches for the upper and lower closing of secondary leaf, floor socket, black safety handle of plastic, plates and Patent key, sticker with data, booklet for installation use and maintenance.

IMPORTANT NOTES TO THE HANDED DOORS

  • All orders have to refer to the “wall opening” dimensions Lfm (width) x Hfm (height).
  • Endoors’ order confirmations, transportation documents and invoices always refer to the “wall opening” dimensions Lfm (width) x Hfm (height).
  • Opening hands are intended “to push” like in following drawing. SX = Left to push. DX = Right to push.
  • The ordered dimensions will be round up to the nearest multiple of 10 mm.
  • Ensure that the dimensions of the desired doors are covered by the certificates listed in the section “Certificates and legislation” and in case of vision panels that the minimum distances from the door’s edges are respected.
  • Doors can be supplied in all the different colors of the RAL range except the pearly and the phosphorescent.
  • Single leaf doors of maximum width 1330 opened 90° with push crossbar models Slash or Thouch-bar maintain mm 1145 free passage considering the 5% tolerance admitted by law (=1140).
  • Single leaf doors of maximum width 1330 are manufactured for real wall opening mm 1328.
  • Leaves higher than 2400 will have 3 hinges.
  • By intensive use or leaves with L ≥ 1145 install overhead doorclosers.
  • Expansion screws and sub-frames are not included in the prices.

Drawings

Dimensions

Handed doors are available in standard and special dimensions.

Special dimensions
Maximum special dimensions:
Wall opening mm 1330 x 2648 for single leaf door.
Wall opening mm 2600(1300+1300) x 2648 for double leaf door.

Net passage dimensions for single leaf doors:
deduct mm 85 from the width and 43 from the height.
Net passage dimensions for double leaf doors:
deduct mm 78 from the width and 43 from the height.

External frame dimensions for single leaf doors:
Add mm 50 to the width and 24 to the height.

External frame dimensions for double leaf doors:
Add mm 60 to the width and 24 to the height.

Standard dimensions
Single leaf

Double leaf EI2 60 and Multipurpose

Double leaf EI2 120

Accessories Included

Following items are included in the prices of the doors.

Fire rated doors:

Multipurpose doors:

In double leaf doors:

Optional Accessories

Following items are optional, delivered to extra price.

WINDOWS FIRE RATED, WINDOWS MULTIPURPOSE AND LOUVERS

WINDOWS FIRE RATED, WINDOWS MULTIPURPOSE AND LOUVERS installed, not openable and with screws for fastening in sight.

Fire rated windows:
Thickness of glass EI2 60 mm 23-25, thickness of glass EI2 120 mm 50-53.
Glasses for exclusive use in interiors they deteriorate if installed on exteriors
Available sizes: mm 300 x 400, mm 400 x 600, circular diameter mm 280, special sizes covered by certificate, consult section “certificates and legislation”.

Multipurpose windows and louvers:
Glasses of security type laminated or wired thickness approx mm 5-6 installed in the upper part of doors minimum width 700.
Louvers of different types installed in the lower part of door unless different indication of the client at order time on doors of minimum width 800.
Available glass sizes: mm 300 x 400, mm 400 x 600, circular diameter mm 280 or any special size distant at least mm 200 from the side edges, mm 300 from top side and mm 500 from the floor.
Available louver sizes: mm 400 x 100 H, mm 453 x 90 H, mm 540 x 240 H, mm 450 x 377 H or any special size distant at least mm 200 from the side edges, mm 300 from top side and mm 500 from the floor.
It is possible to insert more than one glass or louver in the same multipurpose door.

EMERGENCY CROSSBARS:

EMERGENCY CROSSBARS certified and marked CE, delivered with installation instructions and servicing instructions under existing legislation European standard EN 1125. 5 models are available for different needs:

Model TWIST, lever type, black base, bar natural aluminium, crossbar sold and used for years for the convenient price, the easy installation, the perfect operation. Marked CE 376B1422AA. In certificate called TECNO, lever type, 110 mm. jutting.

Model 970 SR, lever type, black base, bar of red color, crossbar relatively new as a very reliable and practical alternative to the model Twist for the color of the bar. Marked CE 376B1322AA prod. TESA, lever type 100 mm. jutting.

Model SLASH, push type, black base, bar natural aluminium, crossbar used when a low encumbrance is needed on doors which open 90° only. Marked CE 366B1322BA. In certificate called TECNO PLUS, push type, 75 mm. jutting.

Model TOUCH BAR, push type, black base, bar of red color, crossbar used when a low encumbrance is needed on doors which open 90° only, alternative to the model Slash for the color of the bar. Marked CE 0425 prod. CISA push type, 72 mm. jutting.

Model INOX, lever type, made of complete stainless steel base and bar, elegant, of high reliability, easy installation and perfect operation. Marked CE 376B1422AA prod. TESA, lever type 100 mm. jutting.

INSTRUCTIONS FOR DRILLING SECONDARY LEAF FOR PANIC BAR INSTALLATION

Download the document from the DOWNLOAD AREA.

ANTIPANIC LOCKS

Certified and marked CE according to standard EN 12209, for 1 leaf door or main leaf (left picture) and for secondary leaf (right picture)

RAL COLORS

RAL COLORS DIFFERENT THAN STANDARD type with epoxypolyester powders oven hardened embossed finishing, suitable for interiors.

RAL COLORS SEMI-STANDARD. Following semi-standard RAL tones are available to a lowered extra price. RAL 1013, RAL 1015, RAL 3000, RAL 5010, RAL 7016, RAL 7024, RAL 9003, RAL 9005.

RAL COLORS SEMI-SPECIAL. Following semi-special RAL tones are available to an extra price. RAL 6000, RAL 6034 (pastel turquoise), RAL 7038, RAL 8017, RAL 9001, RAL 9002, RAL 9018.

RAL SPECIAL. Following special RAL tones are available to a higher extra price. RAL 1003, RAL 3003, RAL 3020, RAL 5024, RAL 6005, RAL 7004, RAL 7037, RAL 7047, RAL 9006, RAL 9011, RAL 9016.

RAL EXCEPTIONAL. All remaining RALs are available except the pearly and the phosphorescent.

Please ask for updated RAL chart, it may change.

CYLINDERS

CYLINDERS to insert in the lock hole and use instead of the cylinder-shaped plastic piece with patent key.
Following types available:
Complete cylinder “40+40” for both sides of the door.
Half-cylinder “40+10” for just one side of door, for example for the pull side of doors equipped with emergency crossbars on push side.
Cylinders like above but uniformed = all the same with the same key.
Mastered cylinders = all different with different keys but 1 master key opens all of them, deliverable in different groups for different building portions.
Cylinders with knob and key on opposite side for hotel rooms.
Cylinders with knob and groove to open with coin on opposite side for WC.

DOORCLOSERS

DOORCLOSERS overhead type certified and marked CE, delivered with installation instructions and servicing instructions under existing legislation European standard EN 1154. 4 models are available for different needs:

SCA – ACCESS CONTROL SYSTEM

Set composed of “SCA” lock with a built-in magnet, wiring inside the door-leaf and foldaway tube with terminal for electric connection on hinge side of the door-frame. Operates at 12 V DC 550 mA or 24 V DC 270 mA. The voltage and amperage should not differ except for usual tolerances otherwise the locks do not work or will burn and lose the warranty. For single leaf doors or main leaf of double leaf doors. Excluded the accessories for the power supply, the timing and electronic management like buttons, card readers etc.
Working system: when the door is closed with the key and electricity is supplied to the lock pressing the lever of the handle the tongue of the lock moves back and the door opens.
2 versions available SCA 1 and SCA 2 for the use with emergency crossbars or lever handles on the 2 sides of door.
SCA 1 = controlling of 1 side with normal lever handle, the other side will remain always openable by pushing the emergency crossbar or by pulling the emergency lever handle.
SCA 2 = 2 controlled sides, both equipped with normal lever handle.
In the order specify the hand of the door (DX-SX) and in case of SCA 1 the controlled side (pull side or push side).

RUBBER GASKETS

RUBBER GASKETS elastic seals for leaf and frame

HANDLES DIFFERENT THAN STANDARD

Lever handles, knobs and plates in different sets with installation instructions

ELECTROMAGNETS

with release button and steel anchor to fasten to the door-leaf, 24V / 60 kg. conform to the standard EN 1155. To connect to control units.

PUSH PLATES AND KICK PLATES

for the push and pull side of the doors. Types:

  • Push plates of stainless steel or alluminium with holes for handle or crossbar mm L x 175 H
  • Kick plates of stainless steel or alluminium L x 220 H or push plate without holes mm L x 175 H

FRAME EXTENSIONS

Telescopic frame extension  made of galvanized steel profiles painted the same color like door and supplied in disassembled pieces to fit together into each other, upper connections at 90 degrees. Available for wall thickness from 85 to 385 mm.

GAP COVER PROFILE

L shaped steel profile galvanized and painted section mm. 20 x 30 to stick with silicone points over the joint of frame and wall, aesthetic solution suitable particularly when doors are installed without mortar by expansion screws on reinforced concrete walls or blocks.

THIRD HINGE

All doors with a height exceeding mm 2400 are supplied with 3 hinges per leaf. Third hinge is also sold as an optional for doors of height up to mm 2400.

Frame Fixing Type

For the handed doors there are several certified types of frame fixing systems:

1.Fixing with clamps and mortar.
2.Fixing with expansion screws.

When fixing with mortar the clamps have to be bent out. When fixing with expansion screws the not bent-out clamp will help as a distancer and the hole on it will be used for the expansion screw, suggested type length 12 cm. and diameter 10 mm. depending anyhow on type of wall.

frame-fixing-type

In the section “SPECIAL DOORS” you can following more certified alternatives:

3.Fixing with embracing frame on plasterboard partitions.
4.Fixing with corner frame on plasterboard partitions.
5.Fixing with screws on sub-frame.
6.Fixing with flush frame in corridor.

Position of Clamps

Knowing the position of clamps, if desired, walls can be prepared for the door’s installation. Hereafter the drawings for the different types of doors.

Encumbrances

Following the drawings of the reversible door’s encumbrances at different opening positions.