Scope
The reversible single leaf doors are constructed for the retailers who want to keep them in their warehouse ready for the immediate sale because due to the reversibility the quantity to keep at stock drops to half.
Lock, handle, hinges, frame and sill are so manufactured to that the doors can be installed with left or right opening hand.
Reversible doors are cheaper if compared to handed doors because for the production there is no waste of raw materials and more doors of the same size can be built faster and with less manpower with consequent costs’ saving.
Careful building contractors or customers whenever and wherever possible prepare the wall openings according to the standard sizes of the doors so to take advantage of the price.
Only doors of standard heights 2060 and 2150 can be built reversible because of the height of the handle from the floor once they will be installed.
Reversible doors cannot be supplied with vision panels, louvers or electric locks, in that case handed doors DX or SX have to be ordered.
Double leaf doors are not built reversible they have to be ordered handed DX or SX.
Description
DOOR EI2 60 Door metallic fire rated 60 minutes single leaf reversible model, supplied assembled with high resistance steel frame on 4 sides and leaf painted with epoxy-polyester powders oven hardened embossed RAL 9010 tone, with clamps to bend open and holes for fixing with expansion screws, 1 hinge with spring and 1 bearing hinge, total thickness of leaf 53 mm of galvanized double steel sheet, fire rating core, thermo-expanding gasket between frame and leaf, 1 bolt hinge side, CE marked lock with tongue and turns, black safety handle with steel core, plates and Patent key, lower frame to remove after installation, conformity mark metallic label, sticker with data, booklet for installation use and maintenance, copy of homologation and conformity declaration.
DOOR EI2 120 Door metallic fire rated 120 minutes single leaf reversible model, supplied assembled with high resistance steel frame on 4 sides and leaf painted with epoxy-polyester powders oven hardened embossed RAL 9010 tone, with clamps to bend open and holes for fixing with expansion screws, 1 hinge with spring and 1 bearing hinge, total thickness of leaf 63 mm of galvanized double steel sheet, fire rating core, thermo-expanding gasket between frame and leaf, 1 bolt hinge side, CE marked lock with tongue and turns, black safety handle with steel core, plates and Patent key, lower frame to remove after installation, conformity mark metallic label, sticker with data, booklet for installation use and maintenance, copy of homologation and conformity declaration.
DOOR MULTIPURPOSE (NOT FIRE RATED) Door metallic single leaf reversible model, supplied assembled with high resistance steel frame on 4 sides and leaf painted with epoxy-polyester powders oven hardened embossed RAL 9010 tone, with clamps to bend open and holes for fixing with expansion screws, 2 bearing hinges of reduced dimension mm 98 x 16,5 Ø, total thickness of leaf 53 mm of galvanized double steel sheet, honeycomb fiber core, CE marked lock with tongue and turns, black safety handle of plastic, plates and Patent key, lower frame to remove after installation, sticker with data, booklet for installation use and maintenance.
The multipurpose doors are available also in 2 more competitive versions:
(A) with frame color RAL 7035 by epoxy-polyester powders oven hardened smooth finishing and leaf color RAL 7035 with pre coated steel sheet and protection film to peel off and leaf-core of expanded polystyrene.
(B) the complete doorset without color finishing, galvanized only and leaf-core of expanded polystyrene.
DOOR MULTIPURPOSE WITH VENTILATION HOLES (NOT FIRE RATED) Door metallic like previous but with ventilation holes of triangular shape symmetric at the 4 corners of leaf.
NOTES TO THE REVERSIBLE DOORS
- All orders have to refer to the “wall opening” dimensions Lfm (width) x Hfm (height).
- Endoors’ order confirmations, transportation documents and invoices always refer to the “wall opening” dimensions Lfm (width) x Hfm (height).
- To favour safety and optimize transportation costs order preferably complete pallets or multiple of them. The quantity per pallet is stated in the price list near the price.
- All optional accessories for the reversible doors are sold separately only. See list of available optional for reversible doors in this sections. Not mentioned optional cannot be installed on reversible doors it is therefore necessary to order handed doors.
- Doors can be supplied in all the different colors of the RAL range except the pearly and the phosphorescent.
- It is possible to order reversible doors with inserted antipanic lock instead of standard lock for the subsequent installation of emergency crossbars, but the holing on the leaf for their fastening remain client’s duty.
- For the fixing by expansion screws or sub-frames these are not included in the door prices.
- Doors of maximum width 1330 opened 90° with push crossbar models Slash or Thouch-bar maintain mm 1200 free passage considering the 5% tolerance admitted by law (=1140).
- In the versions RAL 7035 and galvanized only the color of frame and leaf might slightly differ due to different finishing procedure. In case of doubts pictures or samples can be supplied to request before order.
- For the version galvanized only, without painting minimum order 1 pallet per size.
- Maximum width 1330 is nominal, doors are manufactured with real wall opening mm 1328.
- By intensive use or leaves with L ≥ 1200 install overhead doorclosers.
Drawings

Dimensions
Reversible doors are available in the below listed standard dimensions. Dimensions mentioned in the orders, order confirmations and invoices always refer to the wall opening dimension Lfm (width) x Hfm (height).

Accessories Included
Following items are included in the prices of the doors.
Fire rated doors:
Multipurpose doors:
Standard finishing with epoxypolyester powders oven hardened embossed RAL 9010 (picture left), or pre-coated smooth RAL 7035 with peel-off film (picture in the middle), or galvanized only (picture right).
If ordered with ventilation holes, on the 4 corners of the door-leaf
Optional Accessories
Following items are optional, delivered to extra price.
EMERGENCY CROSSBARS:
EMERGENCY CROSSBARS certified and marked CE, delivered with installation instructions and servicing instructions under existing legislation European standard EN 1125. 5 models are available for different needs:
Model TWIST, lever type, black base, bar natural aluminium, crossbar sold and used for years for the convenient price, the easy installation, the perfect operation. Marked CE 376B1422AA. In certificate called TECNO, lever type, 110 mm. jutting.
Model 970 SR, lever type, black base, bar of red color, crossbar relatively new as a very reliable and practical alternative to the model Twist for the color of the bar. Marked CE 376B1322AA prod. TESA, lever type 100 mm. jutting.
Model SLASH, push type, black base, bar natural aluminium, crossbar used when a low encumbrance is needed on doors which open 90° only. Marked CE 366B1322BA. In certificate called TECNO PLUS, push type, 75 mm. jutting.
Model TOUCH BAR, push type, black base, bar of red color, crossbar used when a low encumbrance is needed on doors which open 90° only, alternative to the model Slash for the color of the bar. Marked CE 0425 prod. CISA push type, 72 mm. jutting.
Model INOX, lever type, made of complete stainless steel base and bar, elegant, of high reliability, easy installation and perfect operation. Marked CE 376B1422AA prod. TESA, lever type 100 mm. jutting.
ANTIPANIC LOCKS
ANTIPANIC LOCKS certified and marked CE according to standard EN 12209
RAL COLORS
RAL COLORS DIFFERENT THAN STANDARD type with epoxypolyester powders oven hardened embossed finishing, suitable for interiors.
RAL COLORS SEMI-STANDARD. Following semi-standard RAL tones are available to a lowered extra price. RAL 1013, RAL 1015, RAL 3000, RAL 5010, RAL 7016, RAL 7024, RAL 9003, RAL 9005.
RAL COLORS SEMI-SPECIAL. Following semi-special RAL tones are available to an extra price. RAL 6000, RAL 6034 (pastel turquoise), RAL 7038, RAL 8017, RAL 9001, RAL 9002, RAL 9018.
RAL SPECIAL. Following special RAL tones are available to a higher extra price. RAL 1003, RAL 3003, RAL 3020, RAL 5024, RAL 6005, RAL 7004, RAL 7037, RAL 7047, RAL 9006, RAL 9011, RAL 9016.
RAL EXCEPTIONAL. All remaining RALs are available except the pearly and the phosphorescent.
Please ask for updated RAL chart, it may change.
CYLINDERS
CYLINDERS to insert in the lock hole and use instead of the cylinder-shaped plastic piece with patent key.
Following types available:
Complete cylinder “40+40” for both sides of the door.
Half-cylinder “40+10” for just one side of door, for example for the pull side of doors equipped with emergency crossbars on push side.
Cylinders like above but uniformed = all the same with the same key.
Mastered cylinders = all different with different keys but 1 master key opens all of them, deliverable in different groups for different building portions.
Cylinders with knob and key on opposite side for hotel rooms.
Cylinders with knob and groove to open with coin on opposite side for WC.
DOORCLOSERS
DOORCLOSERS overhead type certified and marked CE, delivered with installation instructions and servicing instructions under existing legislation European standard EN 1154. 4 models are available for different needs:
RUBBER GASKETS
RUBBER GASKETS elastic seals for leaf and frame
HANDLES DIFFERENT THAN STANDARD
Lever handles, knobs and plates in different sets with installation instructions
ELECTROMAGNETS
with release button and steel anchor to fasten to the door-leaf, 24V / 60 kg. conform to the standard EN 1155. To connect to control units.
PUSH PLATES AND KICK PLATES
for the push and pull side of the doors. Types:
- Push plates of stainless steel or alluminium with holes for handle or crossbar mm L x 175 H
- Kick plates of stainless steel or alluminium L x 220 H or push plate without holes mm L x 175 H
FRAME EXTENSIONS
Telescopic frame extension made of galvanized steel profiles painted the same color like door and supplied in disassembled pieces to fit together into each other, upper connections at 90 degrees. Available for wall thickness from 85 to 385 mm.
UPPER PROFILE
varnished RAL 9010 to install as a cover of the top part of frame of reversible EI2 60 – EI2 120 and multipurpose doors for uniformity of appearance with the 2 vertical sides of frame, including rivets. Profile can be placed also after the installation of the door.
GAP COVER PROFILE
L shaped steel profile galvanized and painted section mm. 20 x 30 to stick with silicone points over the joint of frame and wall, aesthetic solution suitable particularly when doors are installed without mortar by expansion screws on reinforced concrete walls or blocks.
Frame Fixing Type
For the reversible doors there are 2 types of certified frame fixing systems: clamps with mortar and expansion screws. When fixing with mortar the clamps have to be bent out. When fixing with expansion screws the not bent-out clamp will help as a distancer and the hole on it will be used for the expansion screw, suggested type length 12 cm. and diameter 10 mm. depending anyhow on type of wall.

Position of Clamps
Knowing the position of clamps, if desired, walls can be prepared for the door’s installation. Hereafter the drawings for the different types of doors.

Encumbrances
Following the drawings of the reversible door’s encumbrances at different opening positions.
